Wheel Trim - Wheels - Renault Sandero Owner's Manual

WHEEL TRIM - WHEELS

1
B
D
A
C
Wheel trim with concealed
wheel bolts
Remove the wheel trim using the
hubcap tool 1, by inserting the tool into
valve recess 2.
To refit it, align it with valve 2. Push
the retaining hooks in fully, starting
with side A near the valve, followed
by B and C, finishing at D opposite the
valve.
5.4
2
Central wheel trim with
concealed wheel bolts
Remove the wheel trim using the
hubcap tool by inserting the tool 4 into
valve recess 3.
To refit the wheel trim, align recess 3
with the wheel rim, clip the wheel trim
back in place and use tool 4 to tighten
the nut.
We would advise you to note the
number engraved on the tool so that
you can replace it if it is lost.
3
4