Arturia MatrixBrute User Manual page 50

steps together, hold the first step button and press the last step one. All
step buttons but the first are dimmed (darker).
• Accent lights automatically when you enter or record a note at higher
velocities, or you can turn it on to create an accent. This is used in
conjunction with the VELOCITY sliders on the ENV 1 (VCF) and ENV 2
(VCA).
• Slide activate the GLIDE enable button and will allow you to slide from
one note to another.
• MOD toggles modulation on and off for the step. It has to be routed to
a parameter in the modulation Matrix to have an effect, and it can do
all kinds of interesting things.
5.3.0.2. Sequencer transport and Pattern recording/programming
• < and > locate the transport backward or forward one step (when
it's stopped) and trigger the note on the step. (They have a different
function in Arpeggiator mode. See below.)
• Record - (Lights up red.) This works independently of whether the
transport is moving. When it's moving, your playing is recorded in real
time. If it's pushed when the transport is stopped, press any of the 64
step buttons and whatever note you play will be recorded on that step
(at the velocity you play). The button turns pink to indicate the current
step. You can record over any note(s) in a sequence, and you can turn
off individual notes simply by pushing their buttons.
• Play from beginning - (Lights up white.) This works under any
condition - transport moving or stopped, Record active, etc.
44 Arturia - MatrixBrute Manual - The Matrix