User Assignable Destinations - Arturia MatrixBrute User Manual

5.2.3. User assignable destinations

To assign a parameter to destinations 13 - 16:
Hold [13, 14, 15, or 16] button while moving the desired knob or slider on the front
panel. The parameter will appear in the LCD display as shown above.
You can also assign a modulation amount in the matrix itself as a modulation
destination by pressing and holding the [13, 14, 15, or 16] button and pressing a
button in the modulation grid.
For instance:
If you wanted to have the mod wheel adjust the amount of modulation between
the LFO2 and the Metalizer of VCO1, you would first route the LFO2 to the
Metalizer of VCO1 by pressing the F4 button. Then you would select F4 as a
modulation destination by pressing the [13 for example] button and the F4 button.
Now you would choose MOD Wheel to F4 by pressing the H13 button and using
the encoder to turn up this value.
List of MOD sources:
40 Arturia - MatrixBrute Manual - The Matrix