Vco Sync; Voice Mode; Monophonic; Paraphonic - Arturia MatrixBrute User Manual

4.5. VCO Sync

VCO 2 > VCO 1 causes VCO 1 to follow VCO 2's pitch when it's engaged. Turning
VCO 1's Coarse knob will allow you to hear the classic harmonic sync sweep
sound.

4.6. Voice Mode

There are 3 VOICE modes that are available on the MatrixBrute. These modes
allow you to play the synth in ways beyond the standard monophonic way.

4.6.1. Monophonic

Monophonic is the standard voice mode. In this mode, all the oscillators will play
when you press a key ( or send MIDI or CV information ). The voice path is laid
out as you see it in the graphics below.

4.6.2. Paraphonic

Paraphonic mode allows you to play multiple notes at one time. It splits the three
oscillators, one per note played, so that you can play up to 3 notes at once.
Paraphonic differs from polyphonic in that all 3 of the oscillators share the same
filters and VCA settings.

4.6.3. Duo Split mode

Duo split mode allows you to split the keyboard and have 2 completely different
sounds played on each half. To accomplish this, we split the voice up as shown
in the diagram below.
4.6.3.1. Upper part
Signals routed through VCF 1 (the Steiner filter), are controlled by ENV 1 and ENV
2.
Arturia - MatrixBrute Manual - Operation 23