Removing The Stand - Panasonic KX-HNC800 Installation Manual

Appendix
Removing the
stand
1
Hold the camera upside down
and adjust the angle of the
stand as shown.
2
Insert a thin, non-metallic
object into the groove on the
bottom of the camera body,
and then remove the stand by
rotating its base as shown.
30
HNC800_(en_en)_0902_ver.220.pdf
For assistance, please visit http://shop.panasonic.com/support
30
Attaching the stand
Insert a thin, non-metallic object
into the groove on the bottom of
the camera body, and then attach
the stand by rotating its base as
shown.
2016/09/05 17:54:31