Removing The Stand - Panasonic KX-HNC805C Installation Manual

Removing the
stand
1
Hold the camera upside down
and adjust the angle of the
stand as shown.
2
Insert a thin, non-metallic
object into the groove on the
bottom of the camera body,
and then remove the stand by
rotating its base as shown.
For assistance, visit www.panasonic.ca/english/support
HNC805C_(en_en)_0902_ver.110.pdf 29
Attaching the stand
Insert a thin, non-metallic object
into the groove on the bottom of
the camera body, and then attach
the stand by rotating its base as
shown.
Appendix
29
2016/09/05 13:39:11