Charge The Battery - Videocon V1435 User Manual

Getting Started

Charge the battery

To charge the device battery:
1. Take the USB cable from the device packaging,
and attach it to power adapter. Now connect
the power adapter into a standard AC wall
outlet.
2. Connect the micro USB connector on the
cable into its designated port on the device.
3. The battery level indicator on the device
screen start scrolling vertically to indicate
that the battery is being charged.
NOTE: Exercise extreme caution while
connecting the charger to the device. The
connectors on the charger and on the phone
and may get damaged if too much force is
applied while connecting them.
If the battery is completely discharged, it may
take a while before the on-screen charging
indicator starts scrolling.
4. When the battery is fully charged, the battery
level indicator on the device screen will stop
scrolling vertically.
Once charging is complete, disconnect the
charger from the device, and then from the
wall outlet.
PAGE 5