Download Print this page

Fortin RF641W Quick Installation Manual page 9

Remote-starter/alarm system for evo-one
Hide thumbs Also See for RF641W:

Advertisement

When the vehicle is running with the Remote-Starter, enter the vehicle and proceed with the following
steps:
STEP 1
STEP 2
Insert the key and turn it to the ignition (ON/Run) position.
dJh_Warning: Do not turn the key to the START position when the engine is
running. This may damage the ignition system on some vehicles.
Step on the brake pedal to disable the Remote-Starter, and put the vehicle
in gear.
~REMO&~fiARJER
FEATURES
Idle Mode allows the vehicle to run without the key in the ignition barrel. For example, if you stop for a
quick errand or delivery, simply allow the vehicle to run while you are gone. The engine will run until the
Remote-Starter runtime expires. Press START any time the vehicle is running with the Remote-Starter
to reset this timer. To activate Idle Mode (automatic transmission) proceed with the following steps:
.....................
STEP 1
STEP 2
With the key in the barrel at the ignition (ON/RUN) position and the en-
gine running, press the START button until the parking lights turn on.
Turn the key to the OFF position and remove the key from the ignition
barrel. The vehicle will continue to run with the Remote-Starter.
The engine will continue to run until either the remote stop function is pressed, the Remote-Starter
runtime expires, the parking brake is disengaged, the brake is pressed, or the hood is opened. If the
Remote-Starter is shut down by transmitter it will automatically go in to Ready Mode (if all the doors
are closed).
~
WARNING : Never leave children or animals in a Remote-Started vehicle unattended.
Idle mode is activated in much the same way Ready Mode is activated, except for Step 1. To activate
Idle Mode (manual transmission) proceed with the following steps:·
IDLE MODE ACTIVATION:
STEP 2
STEP
3
STEP4
STEP 5
STEP 6
Ensure the transmission is in the NEUTRAL position.
Open at least one door.
Engage the parking brake.
Release the brake pedal.
Press the remote START button. The parking I ights wi II flash once
and then remain on.
Remove the key from the ignition barrel.
The vehicle will continue to run with the the Remote-Starter.
Page 5
I
12

Advertisement

loading