Lorex LNZ32P4 SERIES Instruction Manual page 8

3
Connecting the Camera
2. Connect the camera to the PoE switch using the included Ethernet cable
(or a CAT5e Ethernet cable of up to 300ft (91m)). The PoE switch will pro-
vide power and video transmission the same way as your NVR.
Step 1 of 2 — OPTION B: Connecting the camera to your local network
using a power adapter:
1. Connect the camera to a power adapter (not included).
For power requirement specification, see 6 Technical Specifications.
2. Connect the camera to a router in the same network as your NVR using
the included Ethernet cable (or an Ethernet cable of up to 300ft (91m)
rated CAT5e or higher).
Step 2 of 2: Add the camera to your NVR:
The following instructions are based on the Lorex LNR400 Series NVR. See your NVR's in-
struction manual for instructions on controlling the PTZ camera with your system.
1. Right-click and select Device Search.
#LX400075; r.38010/38010; en-US
NOTE
CAUTION
5