Lorex LNZ32P4 SERIES Instruction Manual page 15

4x ip ptz dome camera

Hide thumbs Also See for LNZ32P4 SERIES:

Table of Contents

Available languages

Installation

6. Holding the flat side of the back plate against the mounting surface, mark

holes for the mounting screws ST4 (x4) and the camera cable. Remove

the back plate and drill where marked.

You do not need to mark holes for the camera cable if you plan to run it along the wall /

ceiling.

1: Mounting screw ST4 (x4) holes, 2: Camera cable hole

7. Attach the back plate to the mounting surface using the mounting screws

ST4 (x4)

included with the wall mounting bracket kit.

Use the drywall anchors included with the wall mounting bracket kit if installing on a

drywall surface.

#LX400075; r.38010/38010; en-US

NOTE

Table of Contents

Chapters

Table of Contents