Feed the sheet into the paper slot until it meets resistance. Make sure the right edge of the paper is
3.
straight and aligned with the vertical line on the roll paper cover.
Press
. The sheet feeds into printing position automatically.
OK
4.
On the screen that appears on the LCD screen, select
5.
or select
Change Settings
Note: To get the best results, you must select the settings that match the loaded media.
Press
.
OK
6.
Print your page. After it is finished, the sheet stays in the printer.
7.
To remove your print, press
8.
Note: To remove paper that was loaded but not used, press the
select Remove Paper and press OK.
and select the correct media.
while holding the sheet.
OK
Loading cut sheets
Keep Settings Above
M
button, press the
|
if the settings are correct,
d
u
or
button to
13