Programming The Lock; Master And User Codes; Programming A User Code; Changing The Master Or User Code - Wittkopp Primor 2000 / Level 15 User Manual

Primor 2000 / Level 15

5 Programming the lock

5.1 Master and user codes

5.1.1 Programming a user code (programme 1)
The master is able to program a user code, but not vice versa.
1. Press and hold the key "1" until the red LED flashes permanently.
2. Enter your 7-digit master code e.g.
3. Enter the user PIN e.g. user 3.
4. Enter the new 7-digit user code e.g.
5. Re-enter the new 7-digit user code e.g.
• A new user code will be allowed only if the code is differing in two places by a single digit from an existing code.
• Should the new code be denied, restart the process of programming.
• If an opening delay is programmed, user 9 for instant opening code (if it has not been programmed yet) can only be pro-
grammed during the release window.
5.1.2 Changing the master or user code (programme 0)
1. Press and hold the key "0" until the red LED flashes permanently.
2. Enter your old 7-digit code e.g. user code.
3. Enter your new 7-digit code e.g.
4. Re-enter your new 7-digit code e.g.
• A new user code will be allowed only if the code is differing in two places by a single digit from an existing code.
• Should the new code be denied, restart the process of programming.
5.1.3 Deleting a user (programme 3)
The master is able to delete a user, but not vice versa.
1. Press and hold the key "3" until the red LED flashes permanently.
2. Enter your 7-digit master code e.g.
3. Enter the user PIN of the user who has to be deleted e.g. user 1.
1
1234567
3
1111111
1111111
0
1111111
5678913
5678913
3
1234567
1
 
 
 
5