Troubleshooting Guide - Honeywell CL15AC Owner's Manual

TROUBLESHOOTING GUIDE

PROBLEM
Cooler not operating Initially.
No discharge of air
Not Cooling / Unit is
making noise
16
POSSIBLE CAUSE
Cord is not plugged in.
Power outlet or supply faulty.
I ncorrect Voltage.
Cord is not plugged in.
Power is not on.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or Calcium
deposits on blower.
SOLUTION
Make sure power cord is plugged
in and the supply switch in ON.
Check the power outlet. Check
the power supply.
Check that the power supply is
the same as specified on the
rating label.
Make sure power cord is plugged
in and the supply switch in ON.
Try to turn the unit ON by
pressing buttons on control
panel or remote control.
Turn on COOL function from
remote or control panel.
Refill water tank.
Contact service centre.