Troubleshooting Guide - Honeywell HC09CESAWK User Manual

TROUBLESHOOTING GUIDE

The following troubleshooting guide addresses the most common problems. If problems persist, call
Customer Support. Unplug and disconnect the appliance from the power source before attempting
to troubleshoot.
PROBLEM POSSIBLE CAUSE
No electricity.
Batteries in the Remote
Unit does not
Control need to be
start
replaced.
The power cord is not
properly plugged in.
The thermostat
temperature setting
is too close to room
temperature.
Unit runs a
Air outlet is blocked.
short while only
There are tight bends in
the air Exhaust Hose.
A door or window is open. Make sure the window or door is closed.
Unit runs but is
not cooling
The Dust Filter is dirty.
SOLUTION
Check for power.
Change Remote Control batteries.
Remove and reconnect the power cord.
Lower the set temperature.
Make sure the exhaust hose is properly connected
and check there are no objects blocking the air outlet.
Connect Exhaust Hose as per instructions on Page 3.
Clean the Dust Filter.
EN 15