CLEANING
Removing and cleaning the guide rails
Replacing the oven light bulb
EN 42
oven door and the adjacent surfaces around the door seal. Do not
rub the seal.
Use conventional cleaning products to clean the guide rails.
• Remove the screw using a screwdriver.
• Remove the guide rails from the holes in the back wall.
The light bulbs (2x) (halogen G9, 230 V, 25 W) are a consumer items
and therefore not covered by warranty. To replace it, first remove the
baking tray, oven rack and guide rails.
Disconnect the appliance from the power supply by removing the plug
from the socket or by switching off the circuit breaker in the fuse box.
Please note: the light bulb can be very hot! Use protection to remove
the bulb.
1. Use a flat-blade screwdriver to snap and remove the lamp cover
from the holder. Be careful not to damage the enamel.
2. Take the halogen light bulb out of the fitting.