Table of Contents
Advertisement
PROBLEM
POSSIBLE CAUSE AND REMEDY
CHIPPING OF CHINA
Rough handling cancause chipping. Load with care. Make sure glassware andchina
aresecure andcan't jar loose. ( See page8 for correct way toload glassware.)
Make
sure tall glasses andstemware will clear the topofthe tubwhen youpushthe rack into
the dishwasher.
Always use the top rack for delicate items.
SMALL AMOUNT OF
Water around the outlet on the tub bottom at the back of the tub is normal. It is dean
WATER STANDING
water. It's there to keep the water seal lubricated.
IN THE BOYIDM
OF THE TUB
WATER WON'T PUMP
If the entire bottom of the tub has water, you may have a drain problem. Clean the air
OUT OF THE TUB
gap, ifyou have one. (Seepage 14.)
Check the kitchen sink. Is it draining well? You may need a plumber.
If dishwasher drains into a disposer, run the disposer to clear. Be sure the disposer is
not clogged.
SUDS IN THE TUB
Sudsing detergents are not meant for dishwashers. USE ONLY AUTOMATIC
DISHWASHER DETERGENTS TO AVOID SUDSING.
To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon
of cold water to the tub. Close and latch the dishwasher. Pump out water by slowly
turning the control dial until a drain period isreached.
Repeat if necessary.
DISHWASHER LEAKS
Suds can cause unit to overflow. That's why it's so important to use a dete_ent that's
designed for automatic dishwashers.
Spilling the rinse agent can cause foam during washing. This can lead to overflow'rag.
Wipe up accidental spill of rinse agent with a damp cloth.
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DU2J and is the answer not in the manual?
Questions and answers