Clas Ohlson 31-4471 User Manual

Projection Clock
Art.no 31-4471
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data. If you
have any questions concerning technical problems please contact our Customer
Service Department.
Safety
• Never mix old and new batteries. Change all batteries at the same time.
• Remove the batteries if the product is not being use during longer periods
of time. If they begin to leak they can ruin the product.
Buttons and Functions
Rotating
Projector lens
projector
Projector button Display, rotates 60°
180°
UP
DOWN
Table
stand
Place batteries inside
1. Open the battery cover on the back of the clock by pushing in and lifting
the lock hinge on the bottom edge of the cover.
2. Insert 3 × LR03/AAA batteries (not included). Make sure to place the batteries
according to the marking in the battery compartment. Never mix old and new
batteries. Change all batteries at the same time.
3. Replace the battery cover by first placing the upper hinges inside and then
push the lower hinge inward.
Projection Use
The projection displays current time and temperature.
• Press PROJECTION ON once to project the time onto e.g. a close wall.
The time is displayed approximately 6 seconds before the projection turns off.
• The projection starts automatically when the alarm rings.

Set time

1. For normal display of time press MODE once. The display shows "12 hr" or "24 hr".
2. Use UP or DOWN buttons to choose 12 or 24 hour display.
GREAT BRITAIN • customer service tel: 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
3. Press SET to select the hour setting. The hour setting blinks in the display.
4. Set the hours with UP or DOWN buttons.
5. Press SET to select the minute setting. The minute setting blinks in the display
6. Set the minutes with UP or DOWN buttons.
7. Repeat step 3 and 4 to set the year, month and date.
8. Press MODE 4 times to go back to normal time display.
Alarm Use
Setting and activating the alarm
1. For normal display of time press MODE twice. The alarm time is shown
in the display.
2. Press SET once to select the hour setting. The hour setting blinks in
the display.
3. Set the hours with UP or DOWN buttons and confirm with SET.
The minute setting blinks in the display.
4. Set the minutes with UP or DOWN buttons and confirm with SET.
Actual ring signal/melody blinks in the display.
5. Select one of the 16 ring signals/melodies with the UP or DOWN buttons.
The selected melody is played. Press SET once to confirm.
6. Press MODE three times to go back to normal time display.
7. The alarm symbol is shown in the display when the alarm is activated.
SET 8. The alarm sounds when the alarm time occurs. Press any button SET, MODE,
UP, or DOWN to shut off the alarm.
MODE
Activating the alarm
1. For normal display of time press MODE twice. The alarm time is shown in
the display.
2. Press SET 5 times. When the display shows "-: - -" the alarm is shut off.
3. Press MODE 3 times to go back to normal time display.
Snooze
1. For normal display of time press MODE once.
The alarm must be activated for this function to be able to be activated.
2. The alarm sounds when the alarm time occurs. Press any button SET, MODE,
UP, or DOWN to shut off the alarm temporarily
The alarm now sounds again every fourth minute up to three times.
3. To shut off the alarm completely, press UP once.
Birthday reminder
Setting birthday
1. For normal display press MODE three times. "-:- -" and
the display.
2. Press SET once to select the hour setting. The hour setting blinks in
the display.
3. Set the hours with UP or DOWN buttons and confirm with SET.
The minute setting blinks in the display.
4. Set the minutes with UP or DOWN buttons and confirm with SET.
5. Repeat step 3 and 4 to set the year, month and date.
6. Press MODE twice to go back to normal time display.
- When the programmed birthday occurs a melody will play to acknowledge
the birthday. Shut off the reminder by pressing any button, SET, MODE,
UP, or DOWN.
- When the birthday reminder is set the symbol for birthday
Activating reminder for birthday
1. For normal display of time press MODE three times. Time and date of
the birthday are shown in the display.
2. Press SET 5 times. When the display shows "- --" the alarm is shut off.
3. Press MODE twice to go back to normal time display.
Countdown
1. For normal time display press MODE four times. "0:00" and
the display.
2. Press SET once to select the hour setting. The hour setting blinks in the display.
3. Set the hours with UP or DOWN buttons and confirm with SET. The minute
setting blinks in the display.
4. Set the minutes with UP or DOWN buttons and confirm with SET.
The countdown starts directly.
5. Press any button, SET, MODE, UP, or DOWN to shut off the alarm.

Temperature display

The temperature is shown in normal mode and also during projection of time.
For normal mode, press SET to select the temperature unit, Celsius (C)
or Fahrenheit (F).

Care and Maintenance

Use a soft damp cloth to wipe the product. Never use strong solvents or detergents.
appears in the display.
Disposal
Follow local ordinances when disposing of this product.
blinks in the display.
If you are unsure about how to dispose of this product contact your municipality.
shuts off.

Specifications

Size
Power Supply
is shown in
is displayed.
is shown in
145 × 45 × 100 mm (W × D × H)
3 × LR03/AAA batteries (not included)