Toshiba rd-xv48dtkb Service Manual page 46

< HDD/DVD Section >
Note: If an error occurs, a message with the error number appears on the screen.
Message
Can not record on this disc.
This program is not allowed to
be recorded.
This program is not recordable
in Video mode.
This program is not allowed to
be recorded on this disc.
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
Solution
Insert a recordable disc, and
ensure the disc status satisfies
the recording requirements.
You cannot record copy-
prohibited programs.
You cannot record copy-
prohibited programs.
You cannot record cop-y
prohibited programs.
1-12-2
Error message
Error No.
E35
Error
Error Description
No.
1 An error occurs during data reading.
There is no reply for 15 seconds in Test
2
Unit Ready.
Cannot write the data after trying three
3
times.
4 An error occurs with OPC.
5 During recovery in a record.
An error occurs even if recovery has been
6
tried three times.
7 An error occurs in a format.
8 It cannot start an encode.
NV_PCK/RDI_PCK is not in encoded
9
data.
Encode Pause condition continued for 10
10
minutes.
Encode Pause condition continued in
11
normal REC condition for 10 minutes.
Difference in the address and cannot get
12
Stream ID of RDI/VIDEO.
13 It is a reply that "ATAPI is not readable."
Cannot write the data after recovering
14
SMALL VMGI.
Cannot write the data after DVD-R
15
Reverse Track.
16 An error occurs in Finalize Close.
17 An error occurs in Rec Stop Close.
18 An error occurs in PCA Full (DVD_R).
19 Safety Stop occurs during editing.
20 High Speed Disc.
21 The disc is not formatted.
22 Disc Error has occurred.
23 The -R Disc of VR Mode.
24 The disc except DVD-R/-RW/+R/+RW.
25 During the Macrovision picture input.
26 During the CGMS picture input.
During the CGMS picture input. (Video
27
Format Disc)
During the CGMS picture input. (VR
28 Format Disc that is not compatible with
CPRM.)
E3NG1FIS