Firmware Renewal Mode - Toshiba rd-xv48dtkb Service Manual

1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into the HDD mode,
press [HDD] on the remote control unit.
3. To put the HDD & DVD into version up mode,
press [VARIABLE SKIP] and [6], [5], [4] buttons on
the remote control unit in that order within 3
seconds. The tray will open automatically.
Fig. a appears on the TV screen and Fig. b
appears on the VFD.
*FIRMWARE version will differ depending on the
model. Fig. a is an example.
Firm Update Mode
Please insert a disc.
Fig. a: Update Mode TV Screen
Fig. b: VFD Display in Update Mode
4. Load the disc for version up.
Fig. c appears on the screen. The file on the top is
highlighted as the default.
When there is only one file to exist, Step 5 will
start automatically.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Disc name
VOL_200703250934
is displayed.
1 TD5T10210X2G
2 TD5T10211X2G
3 TD5T10212X2G
4 TD5T10213X2G
Fig. c: Update Disc TV Screen

FIRMWARE RENEWAL MODE

ver.TD5******X2G
ver.TD5******X2G
Files included
in the disc are
displayed.
1 / 1
5. Select the firmware version pressing arrow
buttons, then press [ENTER].
Fig. d appears on the screen and Fig. e appears
on the VFD. The DVD recorder starts updating.
About VFD indication of Fig. e:
1) When Fig. d is displayed on the screen, "F-UP"
is displayed on the VFD.
2) When "Firmware Updating... XX% Complete."
is displayed on the screen, "10210" is displayed
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Selected
TD5T10210X2G
F/W version
is displayed.
File Loading...
Fig. d Programming Mode Screen
Fig. e VFD in Programming Mode (Example)
The appearance shown in (*1) of Fig. d is
described as follows.
No. Appearance
1 File Loading...
Firmware
2 Updating...
XX% Complete.
Firmware
---
Update Failure
6. After updating is finished, the tray opens
automatically.
At this time, no button is available.
7. Pull out the AC code once, then insert it again.
1-10-1
ver.TD5******X2G
(*1)
State
Sending files into the memory
Writing new version data
Failed in updating
E3NG1FW