Table 2: Indication of DVD self-check (*4)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 3: Indication of HDD self-check (*5)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 4: Available button in self-check mode
BUTTON
ENTER (*6)
ON / STANDBY (*7)
OTHER
5. When the self-check mode is complete, press [
When initializing the HDD & DVD/VCR, press [ENTER] button.After two seconds, the power is turned off
automatically.
NOTE: When initializing, "Current Clock" and "HDD Contents" are initialized.
Connection of DVD is normal.
DVD drive cannot be found.
FFC cable (connecting to CN652) between the DVD drive and the DVD/HDD MAIN BOARD
is not connected correctly.
Connection of HDD is normal.
HDD drive cannot be found.
FFC cable between the BOARD ATA and the HDD drive is not connected correctly.
Initialize (only when the self-check mode is complete)
Turn the power off
Not available
DESCRIPTION
DESCRIPTION
DESCRIPTION
] button to turn the power off.
1-9-2
E3NG0INT