Sony lmd-b170 Operating Instructions Manual page 26

Loop-through, with 75 Ω automatic
terminal function
Audio monitor output connector
Stereo mini jack (1)
Built-in speaker output
2.0 W Stereo
Headphones output connector
Stereo mini jack (1)
General
Power AC 100 V to 240 V, 0.4 A to 0.3 A, 50/
60 Hz
DC 12 V to 17 V, 2.7 A to 1.9 A
Power consumption
Approx. 38 W (max.)
Approx. 28 W (average power
consumption in the default status)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Before Using This Unit (1)
CD-ROM (1)
European Representative (1)
Design and specifications are subject to change without
notice.
26
Specifications
Notes
 Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF

ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
 SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Available video signal formats
The unit is applicable to the following video signal
formats.
System Composite

575/50i

480/60i
576/50p –
1)
480/60p –
1)
640 × 480/60p –
1)
1080/24PsF –
2)
1080/25PsF –
1) 2)
1080/30PsF –
1)
1080/24p –
1080/25p –
1)
1080/30p –
1080/50i –
1)
1080/60i –
1080/50p –
1)
1080/60p –
1)
720/24p –
720/25p –
1)
720/30p –
720/50p –
1)
720/60p –
 : Adjustable/can be set
– : Not adjustable/cannot be set
1) Compatible with 1/1.001 frame rates.
2) 1080/25PsF, 30PsF are displayed as 1080/25PsF, 30PsF on the screen
if the payload ID is added to the video signal when [On] is selected in
[SDI Payload ID Detect] setting. 1080/50I, 60I are displayed if the ID
is not added, or [Off] is selected in [SDI Payload ID Detect] setting.
SD-SDI HD-SDI HDMI
 
–
 
–

– –

– –

– –

– –

– –

– –
 
–
 
–
 
–
 
–
 
–

– –

– –

– –

– –

– –
 
–
 
–