Sony lmd-b170 Operating Instructions Manual page 20

the adjustment screen. However, the level of edge
sharpening remains adjustable. Turn the menu selection
control right to increase the edge sharpening, or left to
decrease it.
[Side by Side]
Press the button to display the two inputs of the SDI
signal in the same screen side by side.
Note
When [Side by Side] is set to on, the scan setting changes
to the normal scan.
When [Side by Side] is set to on, the following functions
turn off.
[Time Code]

[Marker]

[WFM/ALM/Vector]
Press the button to display the WFM/ALM/vectorscope
display. Set the WFM/ALM/vectorscope display setting
in the [WFM/ALM/Vector Setting] menu (see page 22).
[WFM Line Position]
Press the button to display the adjustment screen and
adjust the WFM line position. Press again to hide the
adjustment screen. However, the WFM line position
remains adjustable. Turn the menu selection control
right to lower the line position, or left to raise it.
[Time Code]
Press the button to display the time code display. Adjust
the settings for the time code display in [Time Code
Setting] (see page 21).
[Mono]
Press the button to display a monochrome picture.
When the buttons is pressed again, the monitor switches
automatically to color mode.
[Blue Only]
Press the button to eliminate the red and green signals.
Only blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
"chroma" and "phase" adjustments and observation of
signal noise.
[Scan]
Press the button to change the scan size of the picture.
With every press of the button, the picture switches in
the sequence [Normal] scan or [Native] scan. (see "Scan
mode image" (page 21)).
[Aspect]
Press the button to set the aspect ratio of the picture,
[16:9] or [4:3].
20
Adjustment Using the Menus
[Flip H]
[Flip V]
[Flip H/V]
Press the button to display the reversed image. [Flip H],
[Flip V] and [Flip H/V] can be assigned to each function
button.
Normal display
[Flip V]
Note
When the reverse function is enabled, the following
functions turn off.
 [Side by Side]
 [WFM/ALM/Vector]
 [Time Code]
[Brightness]
Press the button to display the adjustment screen and
adjust the picture brightness. Press again to hide the
adjustment screen. However, the picture brightness
remains adjustable. Turn the menu selection control
right to increase the brightness, or left to decrease it.
[Contrast]
Press the button to display the adjustment screen and
adjust the picture contrast. Press again to hide the
adjustment screen. However, the picture contrast
remains adjustable. Turn the menu selection control
right to increase the contrast, or left to decrease it.
[Chroma]
Press the button to display the adjustment screen and
adjust the color intensity. Press again to hide the
adjustment screen. However, the color intensity remains
adjustable. Turn the menu selection control right to
increase the intensity, or left to decrease it.
[Phase]
Press the button to display the adjustment screen and
adjust the color tones. Press again to hide the adjustment
screen. However, the color tones remain adjustable. Turn
the menu selection control right to increase the green
tone, or left to increase the purple tone.
[Flip H]
[Flip H/V]