Attaching The Unity Click & Go Infant Carrier To The Stroller Frame - Britax b-ready Instruction Manual

INFANT CARRIER
ATTACHING THE UNITY CLICK & GO INFANT CARRIER TO
THE STROLLER FRAME
PLEASE REFER TO PAGE 7 FOR SMART LIFTING TECHNIQUES.
PLEASE NOTE: The infant carrier can be used in the either the forward
facing or rear facing position.
PLEASE NOTE: Ensure the baby is secured in the Infant Carrier with the
harness at all times. Refer to the Infant Carrier instructions regarding
placing and securing your baby in the Infant Carrier.
The Infant Carrier has been fitted with a hood when using the stroller. The
hood may also be used in the car.
A Engage the stroller brake. (Refer to
Page 25)
Align the Infant Carrier Click & Go
connectors with the Click & Go
receivers on the stroller frame.
B Push down on the infant carrier until
a 'click' is heard which indicates the
connectors have locked into the
receivers.
74