Technical Specifications - Midland ALAN 95 D80 PLUS User Manual

Manual ALAN 95 D80 (neue Produktion), 09.11.2004, 15:51, Kirsten Kunter

TECHNICAL SPECIFICATIONS

Frequency range ......................................26.565-27.405 MHz.
Channels....................................................80 FM; 12 AM
Mode of operation ......................................F3E (FM) A3E (AM)
Antenna impedance ..................................50 ohm.
Loudspeaker ..............................................8 ohm 0.5W.
Microphone ................................................condenser type
Power supply .............................................10.9V/15.6V,nominal
Dimensions ................................................40x50x170 mm.
Weight ....................................................... 280GR. (without batteries).
RECEIVER
Sensitivity at 10dB S/N .............................. 0.5µV (AM), 0.25µV (FM)
Selectivity...................................................6dB @ 5KHz
Squelch range............................................0.25V-500mV
Audio output power ....................................0.5W @ 8 ohm (10% distortion)
Distortion at 1000 mV ............................... 3%
Audio frequency response ......................... 400-2400 Hz
Intermediate frequency .............................. I° 10.695 MHz
Spurious response .....................................more than 45 dB
Current drain at stanby .............................. 80 mA when the save mode is off
...................................................................60 mA when the save mode is on
TRANSMITTER
RF Output Power .......................................4W AM 1W FM
Frequency Tolerance.................................0.005%
Harmonic Suppression............................... more than 70 dB
Current Drain .............................................900 mA
Modulation .................................................AM 90% (± 5%) ; FM dev. 2.0KHz
All specifications are subject to change without notice.
batteries 10.8 V).
II° 455 KHz
13.8V (9