Technical Specifications - Siemens Simatic S7-1500 Manual

Technical specifications

Technical specifications of the AQ 4xU/I ST
General information
Product type designation
Hardware functional status
Firmware version
•
Product function
I&M data
Scalable output range
Engineering with
STEP 7 TIA Portal can be configured/integrated
as of version
STEP 7 can be configured/integrated as of version V5.5 SP3 / -
PROFIBUS as of GSD version/GSD revision
PROFINET as of GSD version/GSD revision
Operating mode
Oversampling
MSO
CiR Configuration in RUN
Parameter assignment in RUN possible
Calibration in RUN possible
Supply voltage
Rated value (DC)
Valid range, low limit (DC)
Valid range, high limit (DC)
Reverse polarity protection
Input current
Current consumption, max.
Power
Power consumption from backplane bus
Power loss
Power loss, typ.
Analog outputs
Number of analog outputs
Voltage output, short-circuit protection
Voltage output, short-circuit current, max.
Current output, open-circuit voltage, max.
Cycle time (all channels), min.
Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)
Manual, 09/2016, A5E03484696-AD
FW update possible
6ES7532-5HD00-0AB0
AQ 4xU/I ST
FS01
V2.0.0
Yes
Yes; I&M0 to I&M3
No
V12 / V12
V1.0 / V5.1
V2.3 / -
No
Yes
Yes
Yes
24 V
20.4 V
28.8 V
Yes
190 mA; with 24 V DC supply
0.6 W
4 W
4
Yes
24 mA
22 V
3.2 ms; regardless of the number of activated
channels
6
27