HP 9000 User Manual page 39

Command
pdq
pdresubmit
pdrm
Table 3-3 HPDPS Administrator Commands
Command
pdclean
pdcreate
pddcesetup
pddelete
pddisable
pdenable
pdgwcfg
pdpause
pdpromote
pdresume
pdset
pdshutdown
Chapter 3
Queries the status of one or more jobs in a queue.
Resubmits a previously submitted job (that is pending, timed-out,
retained, or held) to a specified logical printer on the same or
different spooler.
Cancels (removes) one or more previously submitted print jobs.
Removes all jobs from the specified server, printer, or queue.
Creates logical printer, physical printer, queue, initial-value-job, and
initial-value-document objects.
Used to configure DCE information for HPDPS.
Deletes logical printer, physical printer, queue, initial-value-job,
initial-value-document, server, and job objects.
Disables the specified server, printer, or queue from accepting print
requests. Logs also can be disabled.
Allows the specified server, printer, or queue to accept print requests.
Logs also can be enabled.
Configures HPDPS Gateway Printers in a Basic Environment.
Pauses a pending, held, or currently printing job, physical printer,
server, or queue.
Advances the specified job to the beginning of a queue. The job is then
scheduled on the next appropriate printer available.
Resumes a currently paused job, physical printer, server, or queue.
Sets (or modifies) the attribute values of one or more existing objects,
including jobs and documents.
Shuts down the specified server after all jobs have printed, after all
currently printing jobs have printed, or immediately.
Description
Description
Command Reference
HPDPS Commands
39