Pentax Optio A10 Operating Manual page 96

Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller.
Using this function, you can directly set the functions by pressing the
four-way controller without displaying the menu in Capture mode.
In Fn Setting, still picture mode and Movie mode have different settings.
To execute Fn Setting for Movie mode, press MENU button in Movie
mode in Step 1 on page 93.
4
Use the four-way controller (23)
to select [Fn Setting].
5
Press the OK button.
The Fn Setting screen appears.
4
6
Use the four-way controller (23)
to select a key you want to assign
a function to.
7
Press the four-way controller (5).
The pull-down menu appears.
8
Use the four-way controller (23)
to select a function you want to
assign.
9
Press the OK button.
10
Press the shutter release button
halfway.
The camera is ready to take the picture.
This function is activated only when assigning the Fn Setting to the
Green button.
You can assign only one function to each key.
94
Green Button
Shake Reduction
Initialize Rec. Mode
+
Recorded Pixels
Movie
+
EV Compensation
Fn Setting
+
WB White Balance
+ Quality Level
Cancel
MENU OK
Green Button
Fn Setting
+
Shake Reduction
+
EV Compensation
+
Recorded Pixels
+
Quality Level
MENU
Green Button
EV Compensation
Shake Reduction
+
Recorded Pixels
Sharpness
+
EV Compensation
Saturation
+
WB White Balance
Contrast
+
ISO Sensitivity
Off
Cancel
MENU OK
OK
OK