Setting The Functions (Program Mode) - Pentax Optio A10 Operating Manual

Setting the Functions (Program Mode)

In (Program mode), the camera automatically sets the shutter speed
R
and aperture for taking still pictures. However, you can select other
4
functions such as the Flash Mode or Continuous Shooting mode.
1
Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
(2345) to select R (Program
mode).
3
Press the OK button.
4
Set the functions you want to use.
Refer to "Setting the Shooting Functions"
(p.71 - 98) for details of how to set the
functions.
5
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
6
Press the shutter release button fully.
The picture is taken.
54
Taking Still Pictures
Shutter release button
Four-way controller
OK button
Program
Cancel
MENU
p.31
1
OK
OK