Setting The Shake Reduction For Still Pictures - Pentax Optio A10 Operating Manual

Setting the Shake Reduction for Still Pictures

To use the shake reduction function for still pictures (p.52), you need to
set [Shake Reduction] to On in the [
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to
select [Shake Reduction].
3
Use the four-way controller (45) to
select O (On)/P (Off).
On: (Shake Reduction On) is displayed
on the capture screen.
Off: (Shake Reduction Off) is displayed on the capture screen.
4
Press the shutter release button halfway.
The camera is ready to take the picture.
You can also select
function cannot be used when assigning a function other than Shake
Reduction to the Green button. (
Shutter release
button
MENU
Four-way
controller
MENU button
Rec. Mode] menu.
A
O P
(On)/ (Off) using the Green button. This
1
p.93)
Rec. Mode
Recorded Pixels 8
M
Quality Level
White Balance AWB
AF Setting
AE Metering
Sensitivity Auto
MENU Exit
Rec. Mode
EV Compensation
±0.0
Movie
Shake Reduction
Digital Zoom
Instant Review 1sec 1sec
Memory
Exit
MENU
4
91