Taking Pictures Using The Shake Reduction Function - Pentax Optio A10 Operating Manual

Taking Pictures Using the Shake Reduction Function

This camera has a CCD shifting shake reduction system to compensate
for image blur caused by camera shake. The shake reduction function is
4
useful when taking a still image in a dark place, in Macro mode or in Tele
mode. To use the anti-shake function for movies, refer to "Compensating
for Camera Shake While Taking Movies" (p.90).
1
Press the Shake Reduction
preview button.
While holding down the Shake Reduction
preview button, you can see the
compensated image on the LCD monitor.
2
Press the shutter release button
fully.
The picture is taken.
• To activate the Shake Reduction preview button, you need to set
[Shake Reduction] to On on the [A Rec.Mode] menu. For instructions
for setting, refer to "Setting the Shake Reduction for Still Pictures"
(p.91). [Shake Reduction] is set to On in the default settings.
• If you press the Shake Reduction preview button, while the [Shake
Reduction] is set to On on the [A Rec.Mode] menu, the shake
reduction function is activated even in Playback mode or Voice
Recording mode, or when the camera is connected to a PC or a
printer with the USB cable. To reduce power consumption, do not
press the Shake Reduction preview button unless necessary.
Just by pressing the shutter release button, you can take a compensated
still picture without pressing the Shake Reduction preview button. In this
case, the compensated image is not displayed on the LCD monitor.
52
Shake Reduction
preview button
Shutter release button
1/160 1/160 1/160 01/24/2006 01/24/2006 01/24/2006
F2.6 F2.6 F2.6
00:23 00:23 36
12:00 12:00 12:00