Quick Start; Taking Still Pictures; Press The Shutter Release Button - Pentax Optio A10 Operating Manual

The simplest procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.
1
Press the power switch.
The camera turns on.
2
Confirm the subject and shooting
information on the LCD monitor.
The focus frame in the middle of the LCD
monitor indicates the zone of automatic focusing.
You can change the size of the subject by
pressing the zoom button.
: makes the subject bigger.
x
: makes the subject smaller.
w
3

Press the shutter release button

halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
4
Press the shutter release button fully.
The image appears on the LCD monitor for one second (Instant
Review) and is recorded on the SD Memory Card or in the built-in
memory.

Quick Start

Taking Still Pictures

Power switch
Shutter release button
Zoom button
Green button
01/24/2006 01/24/2006 01/24/2006
12:00 12:00 12:00
Focus frame
2
36 36 36
31