S970G-Print.book Page 262 Tuesday, August 20, 2013 9:42 AM
Your phone and TTY device will connect via a special cable that
plugs into your phone's headset jack. If this cable was not provided
with your TTY device, contact your TTY device manufacturer to
purchase the connector cable.
1. From the main Call settings page, tap TTY mode.
2. Tap TTY Full, TTY HCO, or TTY VCO to activate the feature, or
TTY Off to deactivate the feature. Off is the default setting.
Blocking Mode
When Blocking mode is enabled, notifications for selected features
will be disabled. You will only receive notifications of incoming calls
from people on your allowed list.
1. From the Home screen, press
(My device tab).
My device
My device
2. In a single motion touch and slide the Blocking mode slider to
the right to turn it on.
Confirm the Blocking mode active icon
Status bar.
3. Place a green check mark adjacent to those features you
would like to enable. Choose from: Disable incoming calls,
Disable notifications, Disable alarm and timer, Disable LED
indicator.
4. Configure a timeframe for these features to be active. Remove
the check mark from the Always field to configure the From
and To time fields.
262
and then tap Settings
appears in the