❷ Projecting Images Stored In A Usb Memory Device - NEC M403W User Manual

❷ Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar (→ page 79) is set to the factory de-
fault.
• Starting the Viewer .......................................................................below
• Removing the USB memory from the projector ....................... page
• Exiting the Viewer .................................................................... page
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
Starting the Viewer
1. Turn on the projector. (→ page 15)
2. Insert the USB memory into the USB-A port of the pro-
jector.
• Do not remove the USB memory from the projector while
it's LED flashes. Doing so may corrupt the data.
3. Press the SOURCE button on the projector cabinet.
The Viewer start screen will be displayed.
• Press the USB-A button on the remote control.
77
77
75
4. Using the Viewer