Makita CL106FD Instruction Manual page 7

Cordless cleaner

Hide thumbs Also See for CL106FD:

Table of Contents

Install the capsule. Align the mark on the capsule with

the mark near the handle and then firmly twist the cap-

sule in direction of the arrow until it is secured.

► 1 . Capsule 2. Handle 3. Mark

NOTE: Always remove dust ahead of time, as the

suction power will be reduced if there is too much

dust in the cleaner.

NOTICE:

Always be sure to check that both the

filter and prefilter are loaded correctly prior to

using the cleaner. If they are not loaded correctly,

dust will get into the motor housing, and cause a

motor failure. If the following examples occur, the filter

and prefilter are not loaded correctly. Reload them

correctly to rectify problem.

Problem Examples

Example 1: Only the prefilter has been loaded (no filter)

► 1 . Prefilter

Example 2: Only the filter has been loaded (no prefilter)

► 1 . Filter

Example 3: The filter has been loaded in a peeled back

state

► 1 . Filter

Example 4: The securing lip on the prefilter is not firmly

locked in the groove of cleaner housing

► 1 . Securing lip 2. Prefilter 3. Groove of cleaner

housing

7 ENGLISH

Table of Contents