Specification For Remote Control (Optional) - Pentax *ist Operating Manual

150
SPECIFICATIONS TABLE

Specification for Remote Control (Optional)

Remote control
Power source
Dimention
Weight
Infrared remote control. Starts after approx. 3 sec. by pressing the
shutter release button on the remote control. The operating distance of
the remote control is approx. 5 m from the front of the camera.
3V lithium battery (CR1620)
One
About 30,000 commands can be issued using the remote control. If the
battery is exhausted, please have it replaced at your local Pentax
Service center (there is a charge for this service).
22mm {W) x 53mm(H) x 6.5mm(D)
7g