Using Transcriber; To Punctuate In Transcriber - Sprint PPC 6600 User Manual

Using Transcriber

With Transcriber you can write anywhere on the screen using the
stylus just as you would on paper. Unlike Letter Recognizer and Block
Recognizer, you can write a sentence or more of information. Then,
pause and let Transcriber change the written characters to typed
characters.
1. Tap the arrow next to the Input Panel button
Transcriber.
2. Write anywhere on the screen.
For specific instructions on usingTranscriber,withTranscriber open,tap
the question mark in the lower right hand of the screen.

To punctuate in Transcriber:

1 . Tap the keyboard button
2. Tap the desired punctuation.
3. Tap OK to hide the keyboard.
To learn writing in Transcriber:
1. Tap the
screen appears.)
2. At the bottom of the screen, select the character you wish
to explore.
3. At the top of the screen, tap the picture of this character. It
slowly redraws, showing the writing sequence.
4. Select how often you write the character using that method.
When you finish the selection through all the letters, you can save
Tip:
as a profile by tapping File > Save, and then enter a name for the
profile.
Section 2: Getting to know Your PPC6600
button on the tool bar. (A Letter Shapes selector
on the tool bar.
and then
26