Table of Contents
Advertisement
To access Bluetooth Services for configuration:
Tap
1. In the Services field, select the service to be configured.
2. In the Service settings area, enable the selected service by
checking the Enable service box.
3. Authorization required
When enabled, your PPC6600 will require that each attempt to
establish a connection be individually authorized on the pop up
Authorization Request screen; that is, you must authorize each
connection, when a remote device attempts to connect to this
service.
4. Authentication (Passkey) required
When enabled,a passkey or a Link Key is required from the remote
device before allowing the connection.
A passkey is a code you enter to authenticate connections requested by
Note:
other devices. This passkey must be known and used by both parties,
otherwise, the connection will not be allowed.
5. You can also enable the Encryption required function if you
want to require all data exchanged between your PPC6600
and the remote Bluetooth device to be encrypted.
6. Some services have advanced configuration options; if available,
tab Advanced to access the additional settings.
> Bluetooth Settings > Services tab.
1
2
3
4
Section 8: Getting Connected
1
5
6
98
Advertisement
Table of Contents
Troubleshooting
