Table of Contents
Advertisement
e05KB335_33e.qk
6/6/02 4:28 PM
Viewing Images with Macintosh
By using the provided USB cable (I-USB6) or card reader and
image-browser software, you can transfer images recorded with
the camera to a PC and edit them or print them out.
This section explains how to view images on a PC using the pro-
vided USB driver and software.
About the included software
The included CD-ROM (S-SW5) contains the following software:
- USB driver
- Image viewing software (ACDSee™)
System environment
OS:
CPU:
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
To view movie pictures on your Macintosh, QuickTime 4.0 or later
memo
pre-installed on system is required.
When you connect the camera to your PC, you are recom-
Caution
mended to use the AC adapter. If the battery power runs out
while image data is being transferred, the data may be lost.
102
Page 102 (1,1)
Mac OS 8.6 or later (QuickTime 4.0 or later required)
Power PC 266MHz or higher
Installing the software
The procedures for installing the necessary software are
explained.
Installing the USB driver (Only for Mac OS 8.6)
z
Turn on your Macintosh.
x
Set the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
c
Copy the following 2 files to the [Extensions] folder
within the System folder.
PENTAX-USB Storage Driver
PENTAX-USB Storage Shim (E)
v
Restart your Macintosh.
For MacOS 9.x or later, there is no need to install the USB driver.
memo
Installing ACDSee
TM
When installing ACDSee
TM
, recorded images can be viewed on
your Macintosh.
z
Turn on your Macintosh.
x
Set the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
c
Double click your language choice.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v
Follow the on-screen guidance and enter the registration
information and proceed with the installation.
103
Advertisement
Table of Contents
