Viewing Images With Macintosh; About The Included Software; System Environment - Pentax Optio 230 Operating Manual

Viewing Images with Macintosh

By using the provided USB cable or card reader and image-brows-
er software, you can transfer images recorded with the camera to
a PC and edit them or print them out.
This section explains how to view images on a PC using the pro-
vided USB driver and software.

About the included software

The included CD-ROM (S-SW5) contains the following software:
- USB driver
- Image viewing software (ACDSee

System environment

OS:
CPU:
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
To view movie pictures on your Macintosh, QuickTime 4.0 or later
memo
pre-installed on system is required.
When you connect the camera to your PC, you are recom-
Caution
mended to use the AC adapter. If the battery power runs out
while image data is being transferred, the data may be lost.
98
Mac OS 8.6 or later (QuickTime 4.0 or later required)
Power PC 266MHz or higher
TM )