Setting The Date And Time - Pentax Optio 330RS Operating Manual

e01KB335_33e.qk 6/6/02 4:30 PM

Setting the Date and Time

Set the current date and time.
z
Use the four-way controller (
to change the month.
x
Press the four-way controller (
and
above and below the day.
c
Use the four-way controller (
to change the day and press the
four-way controller (
and
above and below the year.
v
Repeat Step
[year] [hour] and [minutes].
b
Use the Display button to select the 12-hour or 24-hour
display format.
18
Page 18 (1,1)
)
Date Adjust
1 / 1 / 2002
00 : 00
12/24
DISP MENU Exit OK Ok
).
Date Adjust
will be displayed
6 / 1 / 2002
00 : 00
12/24
DISP MENU Exit OK Ok
)
Date Adjust
).
6 / 10 / 2002
will be displayed
00 : 00
DISP 12/24 MENU Exit OK Ok
c
to change the
Date Adjust
6 / 10 / 2002
10 : 30
12/24
DISP MENU Exit OK Ok
n
When you have finished the settings, press the
Playback/OK button when the clock reaches 00 seconds.
The screen confirming the settings will be displayed and the
camera is ready to take a picture.
• When the initial settings screen is displayed, you can cancel the
memo
setting operation and switch to Capture mode by pressing the
MENU button. If this is done, the initial settings screen will be
displayed next time you turn the camera on.
• You can change the settings after they have been made. Refer
to "Changing the Date/Time" (p.117).
19