Cd Repeat Function; Cd Prog Function; Cd Scan Function; Cd Compression Function - Fiat doblo User Manual

"CD REPEAT" FUNCTION
To activate this function, press the
knob 22-fig. 1, after selecting "CD RE-
PEAT" by turning the knob. The dis-
play shows "NO REPEAT", "REPEAT
ONE" and "REPEAT ALL".
– "NO REPEAT": repeat function off
– "REPEAT ONE": repeat one CD
track
– "REPEAT ALL": repeat all CD
tracks
Select and confirm the required item
by turning and pressing the knob 22-
fig. 1.
When "REPEAT ONE" or "REPEAT
ALL" is on, the display shows "RPT".
"CD PROG" FUNCTION
To turn the "CD PROG" function
on/off, rotate and press the knob 22-
fig. 1 after selecting the function.
This function enables or disables play-
back of the previously user pro-
grammed track list (see "CD SETUP"
functions).
The "CD PROG" function is disabled
if no programmed list has been en-
tered.
"CD SCAN" FUNCTION
(BRIEF PLAYBACK)
To turn the "SCAN" function on/off,
rotate and press the knob 22-fig. 1
after selecting the function.
When this function is on, all the CD
tracks are played for about 10 seconds
in the actual sequence on the CD.
"CD COMPRESSION"
FUNCTION
This function activates dynamic
sound compression when playing a
CD in the vehicle.
To turn this function on/off, select
and confirm "COMPRESSION" with
the knob 22-fig. 1.
Select "YES" or "NO" to turn this
function on or off.
Select the required option with the
knob 22-fig. 1, then press it to con-
firm.
37