Band Scan Function; Preset Scan Function; Station List Function; Radio Setup Function - Fiat doblo User Manual

"BAND SCAN" FUNCTION
The "BAND SCAN" function acti-
vates station scanning in the chosen
frequency band. Each station frequen-
cy will be displayed for about 10 sec-
onds.
To turn on the "BAND SCAN" func-
tion, select and confirm "BAND
SCAN" with the knob 22-fig. 1 from
the main audio menu.
During scanning, the display will
show "BAND SCAN".
To stop the band scan function, press
"ESC" 23-fig. 1.
"PRESET SCAN" FUNCTION
The "PRESET SCAN" function acti-
vates stored station scanning in the
chosen frequency band. Each stored
station will be played for about 10 sec-
onds.
To turn on the "PRESET SCAN"
function, select and confirm "PRESET
SCAN" with the knob 22-fig. 1, from
the main audio menu.
During scanning, the display will show
"PRES. SCAN". To stop the band scan
function, press "ESC" 23-fig. 1.
"STATION LIST" FUNCTION
The "STATION LIST" function dis-
plays a screen fig. 19, listing the ra-
dio stations previously stored in the
tuned band, the RDS codes and the
corresponding frequencies.
To turn this function on, select and
confirm "STATION LIST" with the
knob 22-fig. 1 from the main audio
menu. To scroll the stored station list
use the encoder 14-fig. 1.
"RADIO SETUP" FUNCTION
To turn this function on, select and
confirm "RADIO SETUP" with the
knob 22-fig. 1 from the main audio
menu.
This function enables to go to next
window to adjust radio settings. When
in this window it is not possible to
change the audio source. The follow-
ing functions are displayed:
– LOC/DX
– MONO/STEREO
– REGIONAL
– NEWS.
33