Auto Vol. Cont; Balance/Fader - Fiat doblo User Manual

AUTO VOL. CONT.

(volume changing with speed)
With the "AUTO VOL. CONT."
function it is possible to automatical-
ly adjust the radio volume level to the
speed of the vehicle, increasing it as
the speed increases to maintain the
correct ratio with the noise level in
the passenger compartment.
The adjustment levels available are:
– OFF (function off)
– 1 (MIN) (min. volume)
– 2
– 3
– 4
– 5
– 6
– 7 (MAX) (max. volume).
To turn the function on/off or enter
the setting, proceed as follows:
– select and confirm "AUTO VOL.
CONT." rotating and pressing the
knob 22-fig. 1;
– turn the knob 22-fig. 1 to select a
setting or turn the function off, then
press the knob to confirm.
fig. 32
BALANCE / FADER fig 32
(sound distribution)
The "BALANCE/FADER" function
shows a schematic representation of
the position of the speakers in the ve-
hicle (left/right and front/rear). Sound
distribution is represented by a red
small square cursor.
To adjust sound distribution, pro-
ceed as follows:
– select
"BALANCE/FADER" rotating and
pressing the knob 22-fig. 1, the display
shows the screen in fig. 33.
F0D2020g
fig. 33
and confirm
F0D2132g
45