RADIO ON
To turn the radio on, push the band selector button FM/AM.
RADIO BAND SELECTION
Successively pushing the band selector button FM/AM
switches the bands as follows: FM1—FM2—AM.
The selected mode will be indicated.
NOTE:
If the FM broadcast signal becomes weak, reception auto-
matically changes from STEREO to MONO for reduced
noise.
TUNING
The radio has the following tuning methods: Manual, Seek,
Scan, Preset Channel, and Auto Memory Tuning. Preset
Channels are the easiest to tune to.
OPERATING THE RADIO
Manual Tuning
Select the station by pushing the tuning button
lightly.
Seek Tuning
Automatic search for radio stations starts when the tuning
button
or
is pushed and a beep sound is heard. The
search stops when a station is found.
NOTE:
If you continue to push and hold the button, the frequency
will continue changing without stopping.
Scan Tuning
Push and hold the scan button MEDIA to sample stations
automatically.
Scanning stops at each station for about five seconds. To
accept a station, push and hold the scan button MEDIA again
during this interval.
23
or