› Then tighten the knob to make sure the device is securely locked in place.
2 .3 Connecting to Power
Use only the supplied car adapter to power up the device and charge the
built-in battery.
› Connect one end of the car adapter to the USB connector of the camcorder.
› Plug the other end of the car charger to the cigarette lighter socket of your
vehicle. Once the vehicle engine is started, the camcorder automatically
powers on.
Note:
The red LED lights up while the battery is charging.
Please take note if the environment temperature reaches 45°C or above, the
car adapter still can supply power to camcorder, but it will not charge the
battery. This is the characteristic of Lithium polymer battery and is not a mal-
function.
7