Inserting The Memory Card; Installing In Vehicles - Midland street guardian User Instructions

2 Getting Started

2.1 Inserting the Memory Card

Insert the memory card with
the gold contacts facing the
back of the camcorder. Push
the memory card until it clicks
into place.
To remove the memory card:
push to eject the memory card
out of the slot.
Note:
Do not remove or insert the memory card when the device is powered on. This
may damage the memory card.
Use class 6 or above micro SD cards for this camcorder.
It is recommended to format the micro SD cards before the initial use.

2.2 Installing in Vehicles

2.2.1 Mount to Windshield
› Attach the bracket to the device. Slide it into the bracket holder until you
hear a click.
› With the suction-cup laying flat, position the suction-cup on the windshield.
› Make sure the base is securely locked in place.
2.2.2 Adjust the device position
› Loose the knob to swivel the device vertically.
› Loose the knob to swivel the device horizontally up to 360°.
6