Initial Settings - Midland street guardian User Instructions

2.4 Powering the Camcorder On / Off
2.4.1 Auto Power 0n/0ff
Once the vehicle engine is started, the
device automatically turns on and starts
recording. Once the vehicle engine shuts
down, the camcorder automatically sa-
ves the recording and turns off the power
within 10 seconds.
2.4.2 Manual Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2 seconds.

2.5 Initial Settings

Before using the device, we recommend you to set up the correct date and
time.
2.5.1 Set the Date and Time
To set the correct date and time, do the
following in standby window:
1. Press [MODE] button to enter the
OSD menu.
2. Press ▼ button to select system
setups.
3. Press [OK] to enter system setups.
Press ▼ to select "Clock Settings"
(Data and Time).
4. Press [OK] and use ▲▼ to change
the digits. Press [OK] again to move
to another digit.
5. Repeat step 4 until the date and time
setting is complete.
8