MC Crypt DJ-80 Instruction Manual page 29

Connection and control elements
(16) LOW/HIGH control (DJ MIC)
You can change the tone of the DJ microphone using the equaliser controls.
HIGH = treble control
LOW = bass control
Turn the control knob as far as it will go to the left for maximum reduction.
Turn the control knob as far as it will go to the right for maximum increase.
Central position = no influence of the signal through the control
(17) GAIN control (CH1/CH2)
Using this rotary control, you can adapt the mixing desk input CH1 or CH2 to the respective output level of
the signal source (record player, CD player, etc.) .
(18) MICROPHONES connection
A dynamic DJ microphone or a DJ capacitor microphone with its own power supply and XLR or jack plug can
be connected to this socket.
(19) Rotary switch ASSIGN
Use this rotary switch to select the channel to which the digital effect is applied.
(20) Display CLIP
This display lights up if the integrated effect device is blasting and distorting the effect signal.
(21) Display
Serves to display the set digital effect.
(22) Rotary switch PROGRAM
Use this rotary control to set the effect of the effect device. The set effect is indicated on the DISPLAY (21).
(23) Rotary control PARAMETER
With this control, you set the variable parameter of the selected effect (e.g. the echo time).
(24) Rotary control RETURN
This control sets the share of the effect signal to be mixed with the output signal of the mixing desk. The higher
the setting the more intense the effect.
29