Installation Instructions; Legend Platinum Ii Components; Pool Connections; Installing The Twist Lock Pressure Relief Valve (Wall Fitting) - Pentair Pool Products Legend Platinum II Installation Manual

II. Installation Instructions
®
A. Legend Platinum II Components
The Legend ® Platinum II Box Contains:
1. Cleaner Head
2. Sand & Silt Bag
3. Sweep Hose
4. Complete Feed Hose
a. 1 - 18 in. hose
b. 1 - 2 ft. hose
c. 1 - 4½ ft. hose
d. 3 - 6 ft. hoses
e. 1- Back-Up Valve
f. 4 - Swivels
g. 1 - Wall Fitting
h. 12 - Mender Nuts
i. 7 - Hose Floats
j. 1 - Pressure Tester
2
B. Pool Connections
®
The Legend Platinum II comes equipped to connect
to a female threaded 1-1/2" dedicated return line. An
adjustable gate valve with a pressure gauge should
be installed to allow a regulated amount of water flow
from your pool system to the Legend
For more information contact our Technical Support
Department at 1-800-831-7133.
Also, if the pool doesn't have a dedicated cleaner
line please contact our Technical Support
Department also.
C. Installing the Twist Lock Pressure
Relief Valve (Wall Fitting)
1. Take out any existing pool cleaner and/or wall
fitting.
2. Turn on the filtration pump and flush out the
plumbing line.
3. Turn off filter pump.
4. Remove the Wall Adapter from the Wall Fitting
and screw Adapter by hand into the dedicated
line. Turn until tight.
QUICK
LOCK
PEG
5. Take the Wall Fitting and Twist Lock the Wall
Fitting into the Wall Adapter 1/4 turn; to a snug fit.
Once the Wall Adapter is secure, you can now
twist lock and unlock to remove Wall Fitting with
ease from the Wall Adapter.
LEGEND® PLATINUM II INSTALLATION MANUAL • MANUEL D'INSTALLATION LEGEND® PLATINUM II
®
WALL ADAPTER
INSTALLED
QUICK DISCONNECT
O-RING
Platinum II.