Setting The Time Of Day; Setting The Minute Minder - Belling XOU69 MF Installation And User Instructions Manual

00000
A=\
Cook Stop
t-t
L.Y
Time Time v
Step
1
Make sure all oven controls are turned OFF.
Step 2 Check the electricity supply to the cooker is turned ON.
When switched on the display will show
0.00
and the
A
symbol,
both will be flashing.
Step 3 Press hold in both the 'cook time' cook period & 'stop time'
end time buttons together.
Step 4 With the 'cook time' cook period & 'stop time' end time buttons
still held in, press either\7 or
b.
buttons to set to correct time of
day.
Step 5 Release all the buttons simultaneously.
The time of day is now set and the
'l3-'
symbol will light up to show that the timer is in Manual Mode.
NOTE: To change the time of day repeat steps 3, 4 & 5 above.
Setting the Minute Minder
Step 1 Ensure the time of day is set correctly.
Step 2 Press and hold the.@ minute minder button.
. . . : \ · · · . . tn .• · . .
Step 3 With button still held in set the required
&
minute minder
\!:V
\!i!i)·
(.3
t.:.J
t1me us1ng '
A '
and
·v·
buttons.
Cook Stop . .
_d)
Time Time
V
A
A
D.
symbol will light up.
Step 4 Release all buttons and the timer display will revert back to the
time of day.
The
D.
symbol will remain lit to signify that a minute minder period has been set.
AC'l Cook Stop t-t
L.Y
Time Time v
00®00
AC'l Cook Stop
L.Y Time Time
V
Note
All the end of the set time a bleeping sound will be heard and the
D.
symbol will go out.
The bleeping sound will continue for several minutes unless cancelled
(See Step 5)
Step 5 To cancal the bleeping sound press the
.@
minute minder button.
The time display will revert back to the time of day after the button
is released.
To cancel the minute minder before the minute minder period has finished.
Step 1 Press the
.@
minute minder button.
Step 2 Press the' 'V'button until 0.00 and the
'l3-'
symbol appears in
the display window.
Step 3 To cancel the bleeping sound press the
if>
minute minder button.
When the minute minder has been set the time remaining can be checked at any time by simply pressing
the
if>
minute minder button. .
11